We produce all kinds of electric heaters.
Band heaters are used for the same purposes as plate heaters – in industries where no extreme temperatures are required (footwear, dressmaking, rubber, textile).
Dimensions of band heaters are from F30 mm up. The maximum power is 6 W/cm2. Casings of band heaters are manufactured of either brass, extended or white metal plate. Heaters without a casing are available as well. The thickness of the plate ranges from 2.5 to 10 mm. The heating wire is flat, made of high-alloy and highly resistant metal. It is coiled on a micanite or natural mica core. Micanite is heat resistant up to temperatures of 800 °C.
A band heater is the best solution for a heater that must not come in contact with the heated medium. It can be used in two different types of band heaters. 1. Band heater for higher temperatures, made of a stainless steel or light- drawn sheet metal housing, highly alloyed wire resistive to 1100 C inserted into ceramic segments. 2. Band heater for lower temperatures, made of a stainless steel or light- drawn sheet metal housing, highly alloyed wire resistive to 900 C wound onto micanite.
Electrical connections are made either of copper or high-alloy wire, insulated by silicone or glass fibres and fixed by screws or by a mechanical junction. The connection is placed on any spot of the plate indicated by the buyer.
The wind has no influence
Proposition for band heaters
Contact us, using the form below